You are here

Share page with AddThis
Proclaim Opti

Proclaim Opti

Insecticide

Composition: 
Activity Group: 
Group 6 Insecticide
Formulation: 
Water-dispersable Granule | WG

For the control of various lepidopteran pests in fruit and vegetable crops as per the Directions for UseFor the control of various lepidopteran pests in fruit and vegetable crops as per the Directions for Use.

Mixing and spraying

Mixing:
Add the required amount of PROCLAIM to a partly filled spray tank, and then add the remainder of the water.

Application:
PROCLAIM is not systemic making good coverage essential - ensure thorough coverage of the crop. DO NOT apply by aerial application.

Mixing/Application – Grapes, Trellised Tomatoes and Eggplants, Strawberries:
Dilute Spraying: Use a sprayer designed to apply high volumes of water up to the point of runoff and matched to the crop being sprayed. Set up and operate the sprayer to achieve even coverage throughout the crop canopy. Apply sufficient water to cover the crop to the point of runoff. Avoid excessive runoff. The required water volume may be determined by applying different test volumes, using different settings on the sprayer, from industry guidelines or expert advice. Add the amount of product specified in the Directions for Use table for each 100 L of water. Spray to the point of runoff. The required dilute spray volume will change and the sprayer set up and operation may also need to be changed as the crop grows.

Concentrate Spraying: Use a sprayer designed and set up for concentrate spraying (that is a sprayer which applies water volumes less than those required to reach the point of runoff) and matched to the crop being sprayed. Set up and operate the sprayer to achieve even coverage throughout the crop canopy using your chosen water volume. Determine an appropriate dilute spray volume (see Dilute Spraying) for the crop canopy. This is needed to calculate the concentrate mixing rate.

The mixing rate for concentrate spraying can then be calculated in the following way:
Example Only
1. Dilute spray volume as determined above: For example 1000 L/ha
2. Your chosen concentrate spray volume: For example 500 L/ha
3. The concentration factor in this example is: 2 X (ie. 1000 L  500 L = 2)
4. If the dilute label rate is 15 g/100 L, then the concentrate rate becomes 2 x 15, that is 30 g/100 L of concentrate spray

The chosen spray volume, amount of product per 100 L of water, and the sprayer set up and operation may need to be changed as the crop grows.

For further information on concentrate spraying, users are advised to consult relevant industry guidelines, undertake appropriate competency training and follow industry Best Practices.