Australia

You are here

»
»
»
Maxim 100 FS
Printer-friendly version
Share page with AddThis

Maxim 100 FS

Last updated:
03.04.2016

Seedcare

Authorisation Number: 
51407/55027
Composition: 
100 g/L
Fludioxonil
Activity Group: 
Group 12 Fungicide
Formulation: 
Suspension concentrate

For the control of damping off caused by Fusarium (Fusarium spp.) and Penicillium (Penicillium spp.) in Maize and Sweet Corn, control of seed borne Black Dot (Colletotrichum coccodes), Fusarium Dry Rot (Fusarium spp.), Rhizoctonia (Black Scurf) and Silver Scurf (Helminthosporium solani), and the suppression of seed borne Common Scab (Streptomyces spp.) in Potatoes.

Maxim 100 FS Label 235 bytes
Maxim 100 FS SDS 71 bytes
More reasons to use MAXIM 100FS in potatoes 828.13 kb

Mixing and spraying

TREATMENT IN SMALL LOTS BY THE FARMER: May be applied by shaking with seed in a tin, enclosed drum or plastic bag. Premix MAXIM 100 FS with water to a total volume of not less than 5 mL nor more than 10 mL per kg of seed when MAXIM 100 FS is applied alone. If additional seed treatments are applied in combination with MAXIM 100 FS, a higher total application volume may be required to ensure even coverage of seed. TREATMENT OF LARGE SEED LOTS BY COMMERCIAL SEED TREATMENT EQUIPMENT: For large scale seed treatment the product should be applied diluted with water in specialised seed-treatment equipment. As for all such seed treatments, a good flow and metering system for the initial prepared solution is important. Depending on the type of seed treatment equipment, it may be necessary to increase the recommended amount of water slightly in order to ensure an optimal flow of the solution and an even treatment of seed. Total volumes of not less than 500 mL nor more than 1 L water per 100 kg of seed are recommended when MAXIM 100 FS is applied alone. If additional seed treatments are applied in combination with MAXIM 100 FS, a higher total application volume may be required to ensure even coverage of seed.